Aruba Switching
  Introduction
  Models of Switches
  Knowledge Base

<< >>
How to Configure VLAN in Aruba 2930 F Switch

Synopsis

This article will provide  to configure the VLAN of  on Aruba 2930 F Switch. 

Configuration Steps:-

     To configure the Host Name of Aruba Device , Please follow the below steps :-

 1) Login the switch

login: username
password: 

 2) Once you will login the switch 

Aruba-2930F-24G-4SFPP# 

 3) Go to Configuration mode from operational mode

Aruba-2930F-24G-4SFPP# configure
Aruba-2930F-24G-4SFPP(config)# 

 4) Use the  (vlan vlan_id) command and Enter it. Then the host name will be gets change 

Switch(config)# vlan vlan-id
Switch(vlan-vlan_id)#

Example:

Switch(config)# vlan 10
Switch(vlan-10)#

 4) To configure the name/description on valn 

Switch(config)# vlan vlan-id
Switch(vlan-vlan_id)# name VLAN_NAME

Example:

Switch(config)# vlan 10
Switch(vlan-10)#name user-vlan-10

5) To Untagged a port in switch

Switch(config)# vlan 10
Switch(vlan-10)#name user-vlan-10

Switch(vlan-vlan_id)# untagged 1

6) Save the configuration.

Switch(config)# write memory

7)To verify the VLAN on switch

Switch(config)# show vlan 

 

<< >>