| Juniper Networking & Security |
|---|
| >> Introduction |
| >> Knowledge Base |
| Others |
| >> Junos Space |
| >> Juniper MIST |
Symptom
Juniper EX-Series switches are a series of switch which is using for the connectivity of Users and end-points in data center and campus networks.
This article will provide the steps to configure the Layer 3 routed VLAN configuration in EX Series switches.
Process
- Login the device with the admin access.
login as: Password :
- Go to Configure mode mode with command ” configure/edit”.
> configure
- Configure the VLAN with assigning the VLAN Name and VLAN ID .
# set vlans VLAN-10 vlan-id 10
# set vlans VLAN-10 vlan-id 20
- Assign an interface to the VLAN by specifying the to logical interface and the VLAN name as the member
#set interface ge-0/0/0 unit 0 family ethernet-switching vlan member VLAN-10- Create theLayer 3 subnet for the VLAN’s domain:It will reflect the hostname of device
#set interface vlan unit 10 family inet address 192.168.10.1/24
#set interface vlan unit 20 family inet address 192.168.20.1/24
- Assign the LAYER 3 Subnet with Specific VLAN
#set vlan VLAN-10 l3-interface vlan.10
#set vlan VLAN-20 l3-interface vlan.20
- Commit /Save the configuration
#commit- To verify the layer 3 raouted VLAN . Check in Operational mode.
>show interface terse
>show vlan brief